EISinsp: Low Voltage Electrical Installation Safety for Inspectors (ADK: D-5/164)

The knowledge is focused on assuring of the Safety for Low Voltage Electrical Installations through Initial Verification and Periodical Inspection regularly. Earthing system recognising, basic and additional protection manners taken, test and measuring methods used and appropriate reporting can limit the risks as low as reasonably practicable. Checklist for the compliance of the complete building, all electrical and other installations shall be inspected, evaluated and reported. Use of Safety Installation Tester is a part of the training. Candidate receives the knowledge on evaluated parameters, the limits suggested from the standard and the examples of PASS or FAIL results.

Areas of Application

  • Requirements for initial and periodic verification of an electrical installation.
  • Inspection and testing, of an electrical installation to determine, as far as reasonably practicable, whether the requirements of the other parts of IEC 60364 have been met.
  • Inspection and testing, determine, as far as reasonably practicable, whether the installation and all its constituent equipment are in a satisfactory condition for use.

Regulation, Literature and Standards

  • IEC / HD 60364-6 Low Voltage Electrical Installation Safety: Part 6 Verification.
  • Handbook with Exercises ˝ Low Voltage Electrical Installation Safety˝, Academy@Metrel
  • Chart ˝Guide through Verification on Low-voltage electrical Installations˝, Academy@Metrel
  • Electrical Inspector’s Guide, Academy@Metrel

Upcoming Events

No event found!

Select your package & register for the exam

Shop for recommended presentations, guides, cheat sheets and charts. Get ready for examination and certification process.

Webinars EISinsp: 4 Webinars over 4 hours with QA

122,00 EUR

Presentations and guides (bundle)

35,70 EUR

Online exam and certificate

61,00 EUR

Get your competency certified

Special offers

EISinsp 3in1 – 10% OFF

EISinsp: 4 webinars – over 4 hours, literature, online exam and certificate

218,70 EUR 196,83 EUR

VIP access

All available webinars

488,00 EUR

Online seminar

Tailored online seminar with live QA support

ADD TO CART
Half-day: 488,00 EUR
Full-day: 854,00 EUR

Webinars

Watch the educational webinars online. Check what is suitable for you in description before add to cart. Check special offer, buy and unlock the content.

Webinar I – Main Course

Webinar PLUS – Special Courses Added

Webinar with QA support from specialist. Get certified!

Buy 3in1 token and get your personal access.

By buying 3in1 token you will get your personal access to webinar and to a specialist who will answer any question you may have.

Combine competences using our QUESTIONNAIRE.

Webinars EISinsp: Over 4 hours / QA support / 5 courses / 1 x Free

EISinsp LV Safety Testing and Reporting by MESM Memory Organizer - Metrel MI 3155 Eurotest XD and MESM PC SW, Leakage Clamps MD 9273

Basics with measuring methods to refresh the theoretical and practical knowledge.

Refresh your knowledge and prepare yourself for CPD competence certification.

Several procedures and measuring methods are explained for maintenance in safe manner when work energized.

by Metrel Academy

FREE Webinars

Watch the promotional and educational webinars online. Check special offer, buy and unlock the content.

by Metrel Academy

Training Schedule

Safety First

Health & Safety at Work with Electricity

  • Use of personal protection equipment
  • Use of electrical equipment and barriers
  • Accessible life parts and limits of approach

Employer / Employee Responsibilities

  • Lockout / Tagout
  • Five safety steps
  • Work permit when energized

Job Briefing and Planning

  • Identify hazards
  • Ask
  • Check
  • Know
  • Think
  • Likelihood of occurrence
  • Prepare for emergency

Practical Knowledge with Measuring Methods and Procedures

 Inspections, Tests & Measurements

  • Type of Voltage System
  • Type of Earthing system
  • Visual Inspection
  • Inspection@Distribution Board
  • Inspection@Circuits
  • Wire Crossections
  • SPD protection connectivity
  • Continuity and Equalization Testing
  • Insulation Resistance Measurement
  • Leakage Current DIFF / PE
  • Automatic Tripout Ability
  • Z / Isc / Fuse protection evaluation
  • RCD and PRCD testing tripot time and Current
  • Functional Checking and Power Consumption Evaluation
  • Harmonics by Components and THD

Evaluation of Results

  • Find the PASS / FAIL / LIMIT values
  • Compare results to the limit
  • Bring the decision

Act and Inform Appropriately

  • Report the results
  • Mark the equipment accordingly
  • Enabling of further use when PASS
  • Rejecting the usage when FAIL
  • Inform and transfer the responsibility

Troubleshooting and Maintenance

  • Voltage presence, Loads Connected / Disconnected
  • Turn ON and Emergency Disconnect
  • Leakage Current checking
  • RCD tripout checking

Certification of Professional Qualification

Based on the knowledge gained in this training you will be ready for the certification of a professional qualification. After passing the exam you can obtain a certificate of competence for EISinsp low voltage electrical installation safety inspection.

The certification process – registration, examination, certification, registering and maintaining the register, notifications – are available through our testing centres worldwide, that will help and guide you through the process. Our trainers and specialists will support you with theoretical and practical experiences.

Get knowledge! Get certificate! Get equipped!

Educate yourself with instructional videos for FREE!

LV Safety Inspection DB

LV Safety Inspection in Building

LV Safety Mobile Homes

Leakage Current Troubleshooting

Firebrigade Vehicle LV Safety

Power Generator Safety