EISc: Low Voltage Electrical Installation Safety for Contractors and Maintainers (ADK: D-5/106)
The knowledge is focused on assuring of the Safety for Low Voltage Electrical Installations through Initial Verification and Periodical Inspection regularly. Basic and additional protection manners taken, test and measuring methods used and appropriate reporting can limit the risks as low as reasonably practicable. Checklist for the compliance of the complete building, all electrical and other installations shall be inspected, evaluated and reported. Candidate receives the knowledge on Safety steps during Maintenance procedure, basics about the limits suggested from the standard and the examples of PASS or FAIL results.
Areas of Application
- Building Facility Management for Electrical Safety in Buildings during Construction, Before Use and through Maintaining Periods.
- Requirements for initial and periodic verification.
- Demand for the inspection and test regularly, periodically, after modification or change.
- Demand for determine, whether the installation and all its constituent equipment are in a satisfactory condition for use.
Regulation, Literature and Standards
- IEC / HD 60364-6 Low Voltage Electrical Installation Safety: Part 6 Verification.
- Electrical Inspector’s Guide, Academy@Metrel
- Chart ˝Guide through Verification on Low-voltage electrical Installations˝, Academy@Metrel
Select your package & register for the exam
Shop for recommended presentations, guides, cheat sheets and charts. Get ready for examination and certification process.
Webinar EISc: EISc webinar, over 1 hour with QA
122,00 EUR
35,70 EUR
Get your competency certified
Exam application formSpecial offers
488,00 EUROnline seminar
Tailored online seminar with live QA support
ADD TO CART
Half-day: 488,00 EUR
Full-day: 854,00 EUR
Webinars
Watch the educational webinars online. Check what is suitable for you in description before add to cart. Check special offer, buy and unlock the content.
At the moment we do not offer webinar only for EISc competency.
You can find the content under EISinsp competency or you can register for Tailored online seminar.
Webinar I – Main Course
Webinar PLUS – Special Courses Added
Webinar with QA support from specialist. Get certified!
Buy 3in1 token and get your personal access.By buying 3in1 token you will get your personal access to webinar and to a specialist who will answer any question you may have.
Combine competences using our QUESTIONNAIRE.
Webinars EISinsp: over 4 hours / QA support / 5 courses / 1 x Free
EISinsp LV Safety Testing and Reporting by MESM Memory Organizer - Metrel MI 3155 Eurotest XD and MESM PC SW, Leakage Clamps MD 9273Basics with measuring methods to refresh the theoretical and practical knowledge.
Refresh your knowledge and prepare yourself for CPD competence certification.
Several procedures and measuring methods are explained for maintenance in safe manner when work energized.
by Metrel Academy
FREE Webinars
Watch the promotional and educational webinars online. Check special offer, buy and unlock the content.
by Metrel Academy
Training Schedule
Safety First
Health & Safety at Work with Electricity
- Use of personal protection equipment
- Use of electrical equipment and barriers
- Accessible life parts and limits of approach
Employer / Employee Responsibilities
- Lockout / Tagout
- Five safety steps
- Work permit when energized
Job Briefing and Planning
- Identify hazards
- Ask
- Check
- Know
- Think
- Likelihood of occurrence
- Prepare for emergency
Practical Knowledge with Measuring Methods and Procedures
Inspections, Tests & Measurements
- Type of Voltage System
- Type of Earthing System
- Visual Checking
- AutoTest@Distribution Board
- AutoTest@Circuits
- Wire Crossections
- SPD protection connectivity
- Continuity and Equalization Check
- Insulation Resistance Check
- Leakage Current DIFF / PE
- Automatic Tripout Ability
- Z / Isc / Fuse protection Check
- RCD and PRCD tripot Check
- Functional Checking and Power Loads Check
Evaluation of Results
- Find the PASS / FAIL / LIMIT values
- Compare results to the limit
- Bring the decision
Act and Inform Appropriately
- Report the results
- Mark the equipment accordingly
- Enabling of further use when PASS
- Rejecting the usage when FAIL
- Inform and transfer the responsibility
Troubleshooting and Maintenance
- Voltage presence, Loads Connected / Disconnected
- Turn ON and Emergency Disconnect
- Leakage Current checking
- RCD tripout checking
Certification of Professional Qualification
Based on the knowledge gained in this training you will be ready for the certification of a professional qualification. After passing the exam you can obtain a certificate of competence for EISc low voltage electrical installation safety for contractors and maintainers.
The certification process – registration, examination, certification, registering and maintaining the register, notifications – are available through our testing centres worldwide, that will help and guide you through the process. Our trainers and specialists will support you with theoretical and practical experiences.
Get knowledge! Get certificate! Get equipped!
Educate yourself with instructional videos for FREE!
LV Safety Inspection in Building
LV Safety Mobile Homes
Leakage Current Troubleshooting