PQA: Power Quality Analyzing & Reporting (ADK: D-5/919)
The knowledge is focused on certification and assuring of the quality of the voltage, current and phase angle recording over standardised period of time, calculate hundreds of parameters according to IEEE 1448, IEEE 1459, IEEE 519, IEC 61000 series, EN 50160 and several other with reporting accordingly. Certified candidate is qualified to recognise faults and bad conditions as well as confirm good quality of the system. Use of Class A or Class S test equipment, recognise and select the proper type of equipment and accessories, evaluate the accuracy of results and PASS or FAIL barriers. The responsibility of the candidate is to make correct reporting, marking, acting and informing appropriately.
Areas of Application
- Automatic Voltage and Power Quality Analysis according to EN 50160 with PASS / FAIL limit evaluation, including flickers and harmonics;
- IEEE-519 Recommended Practice and Requirements for Harmonics Control in Electric Power Systems report creation;
- Energy Demand report creation;
- Power quality standard IEC 61000-4-30 Class A. Predefined recorder profile for EN 50160 survey;
- Use of Troubleshooting and Maintenance Tool to discover voltage sags,swells and dips, RVC evaluation, resonant states, Power Factor evaluation, high neutral conductor currents in 3-phase systems, asymmetry, voltage unbalance, inrush currents, transients;
- Compare the results simultaneously for evaluate operating of filtering systems, power correction equipment, over voltage protection and UPS systems;
- Use of Power Quality Negotiating Tool;
- Download, view and analyse with PowerView PC SW of functionalities needed for evaluation of power quality phenomena and creation of complex reports.
Regulation, Literature and Standards
- IEEE 519 Reporting and evaluating of the results
- EN 50160 Voltage quality reporting and evaluating of the results
- IEC 61000-4-30/-7/-15 – Power quality measurement methods, testing and measurment techniques
- Handbook with Exercises ˝ Low Voltage Electrical Installation Safety˝, Academy@Metrel
Select your package & register for the exam
Shop for recommended presentations, guides, cheat sheets and charts. Get ready for examination and certification process.
Webinar PQA: 1 hour with QA
122,00 EUR
10,50 EUR
Get your competency certified
Exam application formSpecial offers
488,00 EUROnline seminar
Tailored online seminar with live QA support
ADD TO CART
Half-day: 488,00 EUR
Full-day: 854,00 EUR
Webinars
Watch the educational webinars online. Check what is suitable for you in description before add to cart. Check special offer, buy and unlock the content.
Webinar I – Main Course
Webinar with QA support from specialist. Get certified!
Buy 3in1 token and get your personal access.By buying 3in1 token you will get your personal access to webinar and to a specialist who will answer any question you may have.
Combine competences using our QUESTIONNAIRE.
Webinar PQA: 1 hour / QA support / 3 courses
PQA Power Quality Analysing and Reporting - Metrel MI 2893 Power Quality Analser Class ABasics with measuring methods to refresh the theoretical and practical knowledge.
Refresh your knowledge and prepare yourself for CPD competence certification.
Several procedures and measuring methods are explained for maintenance in safe manner when work energized.
by Metrel Academy
Training Schedule
Safety First
Health & Safety at Work with Electricity
- Use of personal protection equipment
- Use of electrical equipment and barriers
- Accessible life parts and limits of approach
Employer / Employee Responsibilities
- Lockout / Tagout
- Five safety steps
- Work permit when energized
Job Briefing and Planning
- Identify hazards
- Ask
- Check
- Know
- Think
- Likelihood of occurrence
- Prepare for emergency
Practical Knowledge with Measuring Methods and Procedures
Inspections, Tests & Measurements
- Automatic Voltage and Power Quality Analysis according to EN 50160 with PASS / FAIL limit evaluation, including flickers and harmonics;
- IEEE-519 Recommended Practice and Requirements for Harmonics Control in Electric Power Systems report creation;
- Energy Demand report creation;
- Power quality standard IEC 61000-4-30 Class A. Predefined recorder profile for EN 50160 survey;
- Use of Troubleshooting and Maintenance Tool to discover voltage sags and swells, resonant states, high neutral conductor currents in 3-phase systems, asymmetry, transients;
- Compare the results simultaneously for evaluate operating of filtering systems, power correction equipment, over voltage protection and UPS systems;
- Use of Power Quality Negotiating Tool;
Evaluation of Results
- Find the PASS / FAIL / LIMIT values
- Compare results to the limit
- Bring the decision
Act and Inform Appropriately
- Report the results
- Mark the equipment accordingly
- Enabling of further use when PASS
- Rejecting the usage when FAIL
- Inform and transfer the responsibility
Troubleshooting and Maintenance
- Work close to energised objects
- Hi Voltage presence Checking
- Tracing of transients
- Harmonics and THD, Filters evaluation
- Currents, Voltages and Phase angle
Certification of Professional Qualification
Based on the knowledge gained in this training you will be ready for the certification of a professional qualification. After passing the exam you can obtain a certificate of competence for PQA Power Quality Analysing & Reporting.
The certification process – registration, examination, certification, registering and maintaining the register, notifications – are available through our testing centres worldwide, that will help and guide you through the process. Our trainers and specialists will support you with theoretical and practical experiences.
Get knowledge! Get certificate! Get equipped!
