ADK: D-5/164 EISinsp: Low Voltage Electrical Installation Safety Inspector (IEC / EN 60364-6)

ADK: D-5/106 EISc: Low Voltage Electrical Installation for Contractors & Maintainers (IEC / EN 60364)

ADK: D-5/105 LPSinsp: Lightning Protection Systems Inspector (IEC / EN 62305)

ADK: D-5/104 LPSc: Lightning Protection Systems for Contractors & Maintainers (IEC / EN 62305)

Electrical safety in surrounding of low voltage installations, earthing and lightning systems of buildings and objects

Low Voltage Electrical Installation Safety Inspector (IEC / EN 60364-6): EISinsp certification is focused on assuring proper inspections of the electrical safety conditions in buildings with different electrical installation systems. Initial and periodic verification of an electrical installation as far as reasonably practicable need to determine whether the requirements of the parts of IEC 60364 have been met and whether the installation and all its constituent equipment are in a satisfactory condition for use. Proper reporting after completion of protection against electrical shock, fire hazards, operability conditions and automatic protection by disconnection is part of certification. Measuring methods and evaluating of protection earthing & grounding, insulation, leakage current, automatic disconnection ability for the fault protection and fuse protection on distribution boards and circuits are part of knowledge evaluation. Certified inspector is qualified to properly execute measurements and evaluate parameters, the limits suggested from the standards and results to PASS or FAIL barriers.

Low Voltage Electrical Installation for Contractors & Maintainers (IEC / EN 60364): EISc certification is focused on knowledge for Contractors assuring the Safety for Low Voltage Electrical Installations through regular Maintenance. Basic and additional protection manners taken, test and measuring methods used and appropriate reporting can limit the risks as low as reasonably practicable. Checklist for the compliance of the complete building, all electrical and other installations shall be inspected, evaluated and reported. Candidate receives the knowledge on Safety steps during Maintenance procedure, basics about the limits suggested from the standard and the examples of PASS or FAIL results.

Lightning Protection Systems Inspector (IEC / EN 62305): LPSinsp certification is focused on assuring of the Lightning Protection of Buildings or Objects through Initial Verification and Periodical Inspection regularly. Basic and additional protection manners taken, inside building and outside building protection, SPD protection, test and measuring methods used and appropriate reporting can limit the risks as low as reasonably practicable. Checklist for the compliance of the complete building protection, all electrical and other installations shall be inspected, evaluated and reported. Use of Lightning System Installation Tester is a part of the training. Candidate receives the knowledge on evaluated parameters, the limits suggested from the standard and the examples of PASS or FAIL results.

Lightning Protection Systems for Contractors & Maintainers (IEC / EN 62305): LPSc certification is focused on knowledge for Contractors assuring the Lightning Protection of Buildings or Objects through regular Maintenance. Basic and additional protection manners taken, inside building and outside building protection, SPD protection, test and measuring methods used and appropriate reporting can limit the risks as low as reasonably practicable. Checklist for the compliance of the complete building protection, all electrical and other installations shall be inspected, evaluated and reported. Candidate receives the knowledge on Maintenance procedure, basics about the limits suggested from the standard and the examples of PASS or FAIL results.

Initial and periodic inspection, verification, maintenance and responsibilities

Initial and periodic inspections for safety of electrical energetic systems and surrounding shall be performed at least each 5 years. Please check Facilities table for advice and compare the demand to local regulation. Only properly trained qualified personnel can perform work of the auditor assessment of electrical safety and quality.

Join the certification process and get the free copy of catalogues of knowledge to prepare yourself for certification easily.

Check Job Briefing and Planing for proper selection of certification needed.

Individual offer for companies and organisations

For your company or organization we can prepare an offer of training or preparation for the exam for an individual competence / qualification. Certification could be prepared in cooperation with employer where several restrictions and job evaluations need to be defined in advance. Application form document could help with employer – employee job briefing & planing for proper approach to energized or lockout tagout procedures.

Contact us and let us know your needs.